// Simulation Description (not used by SRH-2D/3D): Description // Module/Solver Selected (FLOW MOB TEM TC WQ) FLOW // Monitor-Point-Info: NPOINT 0 // Steady-or-Unsteady (STEADY/UNS) UNSTEADY // Tstart Time_Step and Total_Simulation_Time: TSTART DT T_SIMU [FLAG] 0.0 0.1 0.5 // Turbulence-Model PARABOLIC // A_TURB for the PARA Model (0.05 to 1.0) 0.7 // Initial Flow Condition Method (DRY RST AUTO ZONAL VWSE/VWD) DRY // Mesh-Unit (FOOT METER INCH MM MILE KM GSCALE) FOOT // Mesh FILE_NAME and FORMAT(SMS...) I13H.srhgeom SRHGEOM // Bed Friction. ISpace for 2D; ISpace Imethod for 3D. Ispace=1=uniform 2=2DM. Imethod=1=n 2=ks 2 // Number of Material Types 4 // Manning Coefficient in each mesh zone: a real value or a WD~n file name 0.016 0.035 0.012 0.03 // Any-Special-Modeling-Options? (0/1=no/yes) 0 // Boundary Type (INLET-Q EXIT-H etc) MONITORING // Boundary Type (INLET-Q EXIT-H etc) MONITORING // Boundary Type (INLET-Q EXIT-H etc) MONITORING // Boundary Type (INLET-Q EXIT-H etc) MONITORING // Boundary Type (INLET-Q EXIT-H etc) EXIT-H // Boundary Values (Q W QS TEM H_rough etc) 8971.9 EN C // Boundary Type (INLET-Q EXIT-H etc) INLET-Q // Boundary Values (Q W QS TEM H_rough etc) 275 EN CONVEYANCE // Boundary Type (INLET-Q EXIT-H etc) PRESSURE // Boundary Type (INLET-Q EXIT-H etc) PRESSURE // Boundary Type (INLET-Q EXIT-H etc) WEIR // Boundary Type (INLET-Q EXIT-H etc) WEIR // Boundary Type (INLET-Q EXIT-H etc) WEIR // Boundary Type (INLET-Q EXIT-H etc) WEIR // Wall-Roughess-Height-Specification (empty-line=DONE) // Number of In-Stream WEIRs: 2 // Structure WEIR: Nodestring ID Pairs of each weir (Toe_ID Top_ID ...) 9 10 11 12 // Structure: Weir Parameters ZC ZD LW UNIT TYPE [Cw] [a] [b] 9000 -999 200 EN SHARP // Structure: Weir Parameters ZC ZD LW UNIT TYPE [Cw] [a] [b] 9000 -999 200 EN SHARP // Number of In-Stream Pressure Zones: 1 // Pressure Flow ZONE: Nodestring ID Pairs of each zone (Toe_ID Top_ID ...) 7 8 // Structure: PRESSURE ZONE --> TYPE ZC_1 ZC_2 MANNING UNIT FLAT 8980.77 8980.77 0.025 EN // Structure: Pressure Zone Overtop WEIR Parameters: ZTOP DOWN LW TYPE [Cw a b] [HEAD] (empty=NO_OverTop) // Number of In-Stream Flow Obstructions: 0 // Results-Output-Format-and-Unit(SRHC/TEC/SRHN/XMDF/XMDFC/PARA;SI/EN) + Optional STL FACE XMDFC ENGLISH // Headers of Output Variables specified by the User: EMPTY line means default is used // Intermediate Result Output Control: INTERVAL(hour) OR List of T1 T2 ... EMPTY means the end 0.05