You are here: Home Business Center Design & Construction Project Support Materials and Geotechnical Manuals 2023 Field Material Manual 2023 Field Materials Manual as revised to be used on projects advertised between July 1, 2022 and November 10, 2022 Colorado Procedures (CP) CP-50s - Asphalt CP-50s - Asphalt https://www.codot.gov/business/designsupport/materials-and-geotechnical/manuals/2023-field-materials-manual/2023-fmm-pre-nov-10-2022/cps/CP-50s https://www.codot.gov/@@site-logo/siteLogo.png CP-50s - Asphalt CP-50 - Calculation of Dust to Asphalt Ratio of Bituminous Mixes CP-51 - Determining the Theoretical Maximum Specific Gravity of HMA CP-52 - Contractor Asphalt Mix Design Approval Procedures CP 52a, HMA Mix Design - Submittal Checklist CP-53 - Determining Maximum Density of Cold In-Place Recycled Pavement CP-54 - Approval of Asphalt Mix Designs Using Plant Produced Material CP-55 - Reducing Field Samples of Hot Mix Asphalt to Testing Size CP-56 - Guidelines for Using Theoretical Maximum Specific Gravity (Rice) of Project- Produced HMA to Change the Target Specific Gravity for Compaction Compliance CP-57 - Determining the "Free Moisture" in Cold In-Place Recycled Pavement CP-58 - Detecting and Measuring Temperature Segregation of HMA CP-59 - Warm Mix Asphalt Approval
CP-50s - Asphalt https://www.codot.gov/business/designsupport/materials-and-geotechnical/manuals/2023-field-materials-manual/2023-fmm-pre-nov-10-2022/cps/CP-50s https://www.codot.gov/@@site-logo/siteLogo.png CP-50s - Asphalt CP-50 - Calculation of Dust to Asphalt Ratio of Bituminous Mixes CP-51 - Determining the Theoretical Maximum Specific Gravity of HMA CP-52 - Contractor Asphalt Mix Design Approval Procedures CP 52a, HMA Mix Design - Submittal Checklist CP-53 - Determining Maximum Density of Cold In-Place Recycled Pavement CP-54 - Approval of Asphalt Mix Designs Using Plant Produced Material CP-55 - Reducing Field Samples of Hot Mix Asphalt to Testing Size CP-56 - Guidelines for Using Theoretical Maximum Specific Gravity (Rice) of Project- Produced HMA to Change the Target Specific Gravity for Compaction Compliance CP-57 - Determining the "Free Moisture" in Cold In-Place Recycled Pavement CP-58 - Detecting and Measuring Temperature Segregation of HMA CP-59 - Warm Mix Asphalt Approval
CP-56 - Guidelines for Using Theoretical Maximum Specific Gravity (Rice) of Project- Produced HMA to Change the Target Specific Gravity for Compaction Compliance
