Business Center

Download Area

This is the download area for the Engineering Applications that may be downloaded via the Internet.
Index


Bridge Geometry
CDOT COGO
CDOT Work Zone-User Cost Program
Concrete 03
Noise

Plank Bridge Rating
Slab Rating
Timber Bridge Rating
Translator



Bridge Geometry Version 3.0.2 ©2000-2010, Colorado Department of Transportation, All rights reserved.

Version 3.0.2 release notes

Upgrade:

The upgrade is due to a change in the M&S standards and is in the Cross Slope Transition form. The Transition "Vertical curve Maximum Length" default is now 75. If you have an old file with blanks in the "Transition Vertical curve Maximum Length" the blanks will be replaced with 50, the old default.

System Requirements:

  • Operating System: Windows NT, Windows 2000, Windows XP, Vista, Windows 7 for all modules to execute properly.
  • Disk Space: 8MB maximum
  • Memory: 64MB (required)

Installation Instructions:

  1. Uninstall the old version of Bridge Geometry (Start => Settings => Control Panel => Add/Remove Programs).
  2. Download the installation file to a directory on your hard disk by clicking here: Download Bridge Geometry
  3. Execute the installation file BrGeom.MSI.
  4. Click the "Next" button when the "Bridge Geometry Installation Wizard" window appears.
  5. Click on the "Next" button when the "Ready To Install the Application" window appears.
  6. Click on the "Finish" button when the "Bridge Geometry Has Been Successfully Installed" window appears.

CDOT COGO  2.0.6 for AutoCAD 2004 ©2000-2010, Colorado Department of Transportation, All rights reserved.

Upgrades / Bug Fixes in Version 2.0.6

  • If the point numbers in the Tie / Tie command were greater than 32767 then the resulting point was wrong. This was fixed.
  • The copy point command did not allow a point ID to be entered as documented in the manual. This was fixed.
  • The Parcel command was not reporting errors properly.  This was fixed.
  • In the curve data table output to AutoCAD, there may have been rounding errors in the decimal seconds for angular values. This was fixed.
  • In Windows XP and AutoCAD 2004 some computers experienced errors in using COGO in AutoCAD. This was fixed.
  • If the Help => About was clicked while running COGO in AutoCAD2004, the COGO window would appear.  If the COGO window was closed, COGO would not work in AutoCAD anymore.  This was fixed.

System Requirements:

  • Operating System: Windows NT, Windows 2000, Windows XP, Vista, Windows 7 recommended.
  • Disk Space: 20MB maximum
  • Memory: 256MB (recommended)
  • AutoCAD 2004
  • Internet Explorer 6 for AutoCAD 2004

Installation Instructions: (Administrative privileges may be required)

  1. Download the install file to a directory on your hard disk by clicking on the download link: Download COGO for AutoCAD 2004
  2. Double click on the CdotCOGO206.msi .  If COGO is installed, select the remove option and double click on the CdotCOGO206.msi again.
  3. Click the "Next" button when the "Colorado DOT COGO Installation Wizard" window appears
  4. Click on the "Next" button when the "User Information" window appears
  5. Click on the "Next" button when the "Ready To Install the Application" window appears
  6. Click on the "Finish" button when the "Colorado DOT COGO 2.0.6 Has Been Successfully Installed" window appears.
  7. Setup COGO in AutoCAD per the instructions in the COGOManual.pdf

CDOT Work Zone - User Cost program

The CDOT Work Zone - User Cost program is now a web application!  To run the application, visit https://usercost.codot.gov.  Help is available within the application under the "Guide" link at the top of the page.


Concrete 03 (v. 4.0.1.500) ©2001-2010, Colorado Department of Transportation, All rights reserved.

For the Concrete 03 User Guide click here.

System requirements:

  • Processor: Pentium
  • Operating System: Windows 2000, Windows XP. Please note that Concrete 03 is NOT supported on Windows 8, Windows 8.1 or Windows 10.
  • Disk Space: 15MB, 25MB required for installation.
  • Memory: 64MB

Install Procedures:

  1. Download the Microsoft Windows Installer (.MSI) file to a directory on your hard disk by clicking here: Concrete 03
  2. Execute the .MSI file Concrete 03.msi (Version 1.1 or higher of Microsoft Windows Installer required; administrative privileges are required to install Concrete 03).
  3. Accept the defaults.

Note: The install does not create any shortcuts on the user's desktop, to create a shortcut on your desktop: Click on  Start menu--> CDOT Applications --> Concrete 03 -->Concrete 03,  right click and choose send to --> Desktop (create shortcut) to create your new shortcut on the desktop.


NOISE 4 ©2000-2010, Colorado Department of Transportation. All rights reserved.

CDOT Noise Simulation Application

System Requirements:

  • Operating System: Windows 2000, Windows XP.
  • Disk Space: 1MB maximum
  • Memory: 32MB (recommended)

Installation Instructions:

  1. Download the self-extracting file to a directory on your hard disk by clicking on the download link: Download Noise
  2. Execute the self-extracting file Noise.EXE.  This will create some files in your C:\TEMP folder.
  3. Execute C:\TEMP\SETUP.EXE and accept the defaults.

Plank ©1998-2010, Colorado Department of Transportation. All rights reserved.

CDOT Plank Bridge Rating

Plank System Requirements:

  • Operating System: Windows 2000, Windows XP.
  • Disk Space: 2MB maximum
  • Memory: 32MB (recommended)

Installation Instructions:

  1. Download the self-extracting file to a directory on your hard disk by clicking on the download link: Download Plank
  2. Execute the self-extracting file Plank.exe.  This will create some files in your C:\TEMP folder.
  3. Execute C:\TEMP\SETUP.EXE and accept the defaults

CDOT Concrete Slab Rating 2.1.0 ©1998-2010, Colorado Department of Transportation. All rights reserved.

Slab System Requirements:

  • Operating System: Windows 2000, or Windows XP.
  • Disk Space: 2MB maximum
  • Memory: 32MB (recommended)


Installation Instructions:

  1. Download the .MSI file to a directory on your hard disk by clicking on the download link: Download Slab
  2. Execute the installation file Slab.msi.
  3. Click the "Next" button when the "Slab Installation Wizard" window appears.
  4. Click on the "Next" button when the "User Information" window appears.
  5. Click on the "Next" button when the "Ready To Install the Application" window appears.
  6. Click on the "Finish" button when the "Slab Has Been Successfully Installed" window appears

Timber Bridge Rating ©1998-2010, Colorado Department of Transportation. All rights reserved.

Timber System Requirements:

  • Operating System: Windows 2000, Windows XP.
  • Disk Space: 2MB maximum
  • Memory: 32MB (recommended)

Installation Instructions:

  1. Download the self-extracting file to a directory on your hard disk by clicking on the download link: Download Timber
  2. Execute the self-extracting file Timber.exe. This will create some files in your C:\TEMP folder.
  3. Execute C:\TEMP\SETUP.EXE and accept the defaults

Survey Code Translator ©2004-2010, Colorado Department of Transportation. All rights reserved.

Translator System Requirements:

Survey Code Translator Manual
  • Operating System: Windows 2000 or Windows XP.
  • Disk Space: 1MB maximum
  • Memory: 64MB (recommended, the more the better)

Installation Instructions:

  1. Download the installation file to a directory on your hard disk by clicking on the download link:
    Download Translator.
  2. Execute the installation file PICS2InRoads223.msi.
  3. Accept the defaults

Colorado: The Official State Web Portal