The root directory for all project specific ROW Survey data:
|
Sub-directory |
File Name |
Description |
|
Correspondence |
|
|
|
Acquisition |
|
|
|
Appraisal |
|
|
|
Permission_To_Enter |
|
|
|
Property_Management |
|
|
|
ROW |
|
|
|
Survey |
|
|
|
Drawings
|
|
Sheet Files - Plan set sheets and detail sheets |
|
|
JPC#MonumentationSheet##.dgn |
|
|
|
JPC#ROWOwnershipSheet##.dgn |
|
|
|
JPC#ROWSheet##.dgn |
|
|
|
JPC#ROWTabulationofPropertiesSheet01.dgn |
|
|
|
JPC#ROWTabulationofPropertiesSheet02.dgn |
|
|
|
JPC#ROWTabulationofPropertiesSheet03.dgn |
|
|
|
JPC#ROWTabulationofPropertiesSheet04.dgn |
|
|
|
JPC#ROWTitleSheet##.dgn |
|
|
|
JPC#SURVPlanSheetLSCD##.dgn |
|
|
|
JPC#SURVPlanSheetPCD##.dgn |
|
|
|
JPC#SURVTitleSheetLSCD##.dgn |
|
|
|
JPC#SURVTitleSheetPCD##.dgn |
|
|
Reference_Files |
|
All final model files to be referenced to the sheets |
|
|
JPC#ROWModel##.dgn |
|
|
|
JPC#SurveyModel##.dgn |
|
|
|
JPC#SurveyTopo##Scale##.dgn |
|
|
|
JPC#SurvTopoCodes##Scale##.dgn |
|
|
|
JPC#SurvTopoContour##Scale##.dgn |
|
|
|
JPC#SurvTopoElev##Scale##.dgn |
|
|
|
JPC#SurvTopoNames##Scale##.dgn |
|
|
|
JPC#SurvTopoNotes##Scale##.dgn |
|
|
|
JPC#SurvTopoSymbols##Scale##.dgn |
|
|
Tabs |
|
All tabulation support data: xls, doc, and pdf files |
|
|
JPC#_Row_Property_Tab_Sheet.xls |
|
|
InRoads |
|
All InRoads data: dtm, alg, tml, rwl, rwk and reports |
|
DTM |
|
|
|
Field_Books |
|
|
|
Geometry |
|
|
|
Legals |
|
|
|
Reports |
|
|
|
Research |
|
|
|
Government |
|
|
|
Miscellanious |
|
|
|
Plan |
|
|
|
Title |
|
|
|
Survey |
|
|
|
Level |
|
|
|
Monument_Information |
|
|
|
Photogrammetry |
|
|
|
Photos |
|
Electronic photo files or scanned photos concerning the project and surroundings |
|
Raw_Data |
|
|
|
TGO |
|
|
|
Working |
|
Design iterations and miscellaneous drafting without impacting final model files found in the Reference_Files subdirectory. The designers' initials should pre-fix all files in this directory so multiple designers can work within this directory. Working files should be used as reference models. When a working design is complete, copy it into the Reference_Files Folder and rename it to the standard naming convention. This directory will be deleted at project close-out. |