US 24 Curve Correction in Teller County

Traffic Impacts - July 23 to July 29

• Single lane closures on US 24 will be in place within the work zone 
• The closures will be taken during daytime hours between approx. 8 a.m. and 5 p.m. Monday to Thursday, and from 8 a.m. to noon on Friday
• Single lane closures will also be taken from approx. 8 a.m. to 5 p.m. on Saturday, July 29 during milling operations
• During lane closures, alternating eastbound/westbound directions of traffic will be shifted into the open lane, managed by uniformed traffic control personnel and/or flaggers
• Motorists can expect delays up to 15 minutes during alternating traffic holds
• Signs and construction devices will be present to alert motorists to the closures and presence of work crews
• Speeds are reduced to 40 mph in the work zone
• Caution is advised
• All closures are weather and work dependent and subject to change

General Travel Advisory

• The project limits extend from Mile Point 272.6 to MP 272.9
• During single lane closures of US 24, alternating directions of traffic will be managed by uniformed traffic control personnel and/or flaggers
• Motorists can expect delays up to 15 minutes during traffic holds
• CDOT has authorized up to five full daytime closures of US 24 (no more than five occurrences) during construction
• During these full daytime closures of US 24, all traffic will be detoured to recommended routes
• The project began on May 1 and is expected to last for approx. 75 calendar days, not including delays due to weather events
• All construction schedules are weather and work dependent and subject to change

Nearby Project Impacts

• Crews are repairing two structures between MP 271 and 272
• Shoulder closures and lane closures are possible over the course of construction