Loveland Pass (US 6) extended closure due to mountain slide and clean-up
Travel Advisory

Clear Creek County - Colorado Department of Transportation crews have started clean-up operations Monday morning, June 16, of a mountain slide that is approximately 100 ft. wide and 15 to 20 ft. deep at Mile Point 226 on Loveland Pass (US 6). The mountain slide occurred at 5:30 a.m., Sunday, June 15. The material above the roadway became saturated by melting snow and slid onto the roadway.
The clean-up operations will be done in two stages. The first stage will remove the mud and silt from the travel lanes. Once that is complete, the slide will be assessed again to make sure it is stable. The second stage will clean the remainder of the slide.
While crews are working diligently to clear the slide, there is no estimated time as to when Loveland Pass will re-open. It will not re-open to traffic until the roadway is safe. Motorists, hikers and cyclists are urged to stay away from the area until the clean-up is complete.
There is a record of this area partially sliding in 2003, but it stabilized on its own shortly afterward, with no history of movement over the past 22 years.
Due to the Loveland Pass closure, CDOT is escorting trucks carrying hazardous materials through the I-70 Eisenhower-Johnson Memorial Tunnels (EJMT) at the top of the hour. At that time, traffic will be held for hazmat vehicles to drive through. Hazmat vehicles are not allowed through the EJMT due to safety concerns, but when Loveland Pass is closed, they are escorted through the tunnel.
Note to newsrooms: No media availability on the site today, June 16. Crews are operating in a safety-sensitive environment with limited room to maneuver.
Contact [email protected] for Loveland Pass mountain slide photos from June 15, 2025. New photos will be posted as they come in.
Know Before You Go
Travelers are urged to “know before you go.” Gather information about weather forecasts and anticipated travel impacts and current road conditions prior to hitting the road. CDOT resources include:
- Road conditions and travel information: COtrip.org
- Download the COtrip Planner app: bit.ly/COtripapp
- Sign up for project or travel alerts: bit.ly/COnewsalerts
- Check scheduled construction lane closures: bit.ly/laneclosures
- Connect with @ColoradoDOT on social media: X, Facebook, Instagram and YouTube
Remember: Slow For The Cone Zone
The following tips are to help you stay safe while traveling through maintenance and construction work zones.
- Do not speed in work zones. Obey the posted speed limits.
- Stay Alert! Expect the unexpected.
- Watch for workers. Drive with caution.
- Don't change lanes unnecessarily.
- Avoid using mobile devices such as phones while driving in work zones.
- Turn on headlights so that workers and other drivers can see you.
- Be especially alert at night while driving in work zones.
- Expect delays, especially during peak travel times.
- Allow ample space between you and the car in front of you.
- Anticipate lane shifts and merge when directed to do so.
- Be patient!
Download the COtrip App!
The new free COtrip Planner mobile app was designed to meet the growing trend of information on mobile and tablet devices for the traveling public. The COtrip Planner app provides statewide, real-time traffic information, and works on mobile devices that operate on the iOS and Android platforms. Visit the Google Play Store (Android devices) or the Apple Store (iOS devices) to download!