Business Center

Materials Bulletins

Updated on December 28, 2015.
File COC Documentation for All Admixtures in Concrete Mix Designs
2017-1. August 23, 2017. When CP 62 was revised, a new mix design approval process was created along with a concrete mix design Approved Products List (APL).
File CP 78-16a Certification of High Speed Profilers
2015-2. December 28, 2015. The intent of this Materials Bulletin is to replace in total the old CP 78-16 from the 2016 Field Materials Manual (FMM) or any previous FMMs that is still being utilized on an active project with the latest CP 78-16.
File CDOT’s 2015-a FMM CP 13-15a, Check Testing
2015-1. April 7, 2015. The intent of this Materials Bulletin is to replace in total CP 13 with CP 13-15a from the 2015 FMM and any previous FMM that is still being utilized on an active project.
File M-E Pavement Design Manual
2014-3. December 29, 2014. This Material Bulletin replaces Tables 2.4 and 2.5 of Chapter 2 in the 2015 M-E Pavement Design Manual with revisions to the permanent deformation values.
File CDOT’s 2014-a FMM CP 17-14a, Hot Mix Asphalt Test Result Verification and Dispute Resolution
2014-2. March 4, 2014. This Materials Bulletin replaces in total CP 17 from the 2014 FMM due to the creation of an associated Process Documentation Worksheet.
File CDOT’s 2014-a FMM Quality Control & Quality Assurance Software Chapter
2014-1. March 4, 2014. This Materials Bulletin revises the contact person for the CDOT Quality Control / Quality Assurance (QC/QA) computer program.
File CDOT’s 2014 FMM Special Notice to Contractors
2013-1. July 1, 2013. The intent of this Materials Bulletin is to correct an error within the published Special Notice to Contractors - 14 for the recently released 2014 Field Materials Manual.
File CDOT Micropile Use & FHWA's Buy America
2011-02. October 14, 2011. This bulletin is meant to communicate the FHWA’s official position on the applicability of Buy America provisions to steel casings used in micropile construction.
File MIT-Scan-2 - Evaluating Dowel Bar Placement
2011-1. July 14, 2011. Useful tips on how to use the MIT-Scan-2 and transferring the data into a format that coincides with CDOT 412-13.
File PDF document Class R Concrete A Guide for the RME
2008-2. March 11, 2008. Class R concrete.
File PDF document Geosynthetics and Geotextiles
2008-1. January 25, 2008. Revision of Sections 208, 420, 605, and 712 - Geosynthetics and Geotextiles.
File Pavement Type Selection Committee
Policy Memo 16. March 21, 2003. To assist in the pavement type selection process, a committee should be formed when the initial Life Cycle Cost Analysis (LCCA) results indicate the pavement types are within 10%.
File object code Memorandum - Use of ME Design on CDOT Projects
December 12, 2012.
Archived Bulletins
Contact Us
  • Bill Schiebel
    Materials & Geotechnical Branch Manager 
    Contact Bill.

  • Eric Prieve
    Concrete & Physical Properties Program Manager 
    Contact Eric.

  • Stephen Henry
    Pavement Management Program Manager
    Contact Stephen.

  • Jay Goldbaum
    Pavement Design  & Documentation
    Program Manager 
    Contact Jay.

  • Ty Ortiz
    Program Manager 
    Contact Ty.

  • Mike Stanford
    Asphalt Program Manager
    Contact Mike.

  • David Thomas
    Soils & Geotechnical Program Manager
    Contact David.

  • Norma Gonzalez
    M&G Branch Program Assistant
    Contact Norma.
Colorado: The Official State Web Portal